SYLLABUS OF KUK CIVIL ENGG BTECH 1ST

MATHEMATICS-I
(COMMON FOR ALL BRANCHES)
L T P Theory: 100 Marks
4 1 - Sessional: 50 Marks
Total: 150 Marks
During of exam : 3 Hrs.
UNIT-I
Applications of Differentiation : Taylor’s & Maclaurin’s series, Expansion by use of known series, Expansion by forming a differential equation, Asymptotes, Curvature, Radius of Curvature for Cartesian, Parametric & polar curves, Centre of curvature & chord of curvature, Tracing of Cartesian & polar curves (standard curves).
UNIT – II
Partial Differentiation & its Applications : Functions of two or more variables Partial derivatives, Total differential and differentiability, Derivatives of composite and implicit functions, change of variables.
Homogeneous functions, Euler’s theorem, Jacobian, Taylor’s & Maclaurin’s series for functions of two variables (without proof), Errors and approximations, Maxima-minima of functions of two variables, Lagrange’s method of undetermined multipliers, Differentiation under the integral sign.
UNIT – III
Multiple Integrals and their Applications : Double integral, change of order of integration Double integral in polar coordinates, Applications of double integral to find area enclosed by plane curves and volume of solids of revolution.
Triple integral, volume of solids, change of variables, Beta and gamma functions and relationship between them.
UNIT – IV
Vector Calculus : Differentiation of vectors, scalar and vector point functions Gradient of a scalar field and directional derivative, divergence and curl of a vector field and their physical interpretations, Del applied twice to point functions, Del applied to product of point functions.
Integration of vectors, line integral, surface integral, volume integral, Green’s, Stoke’s and Gauss divergence theorems (without proof), and their simple applications.
TEXT BOOKS:
1. Advanced Engineering Mathematics : F. Kreyszig.
2. Higher Engineering Mathematics : B.S. Grewal.
REFERENCE BOOKS:
1. Engineering Mathematics Part-I : S.S. Sastry.
2. Differential and Integral Calculus : Piskunov.
3. Advanced Engineering Mathematics : R.K. Jain and S.R.K. Iyengar
4. Advanced Engg. Mathematics : Michael D. Greenberg
Note: The Examiners will set eight questions, taking two from each unit. The students are required to attempt five questions in all selecting at least one from each unit. All questions will carry equal marks.
PHY-101E
PHYSICS-I
(COMMON FOR ALL BRANCHES)
L T P Theory: 100 marks
3 1 Sessional: 50 marks
Total: 150 marks
Time: 3 Hrs.
B.
UNIT-I
PHYSICAL OPTICS
Interference: Division of wave front-Fresnel's biprism, Division of amplitude–Newton's rings, Michelson interferometer, applications.
Diffraction: Difference between Fraunhofer and Fresnel diffraction. Fraunhofer diffraction through a slit. Plane transmission diffraction grating, its dispersive and resolving powers.
Polarization: Polarised and unpolarized light, double refraction; Nicol prism, quarter and half wave plates, Polarimetry; Biquartz and Laurent's half-shade polarimeters, Simple concepts of photoelasticity.
UNIT-II
LASER: Spontaneous and stimulated emissions, Laser action, characteristics of laser beam-concepts of coherence, He-Ne and semiconductor lasers (simple ideas), applications.
FIBRE OPTICS: Propagation of light in fibres, numerical aperture, single mode and multi mode fibres, applications.
C.
UNIT-III
WAVE AND OSCILLATIONS: Simple concepts of Harmonic Oscillator, resonance, quality factor. E.M. wave theory-review of basic ideas, Maxwell's equations, simple plane wave equations, simple concepts of wave guides and co-axial cables, Poynting vector. DIELECTRICS: Molecular theory, polarization, displacement, susceptibility, dielectric coefficient, permitivity & various relations between these, Gauss's law in the presence of a dielectric, Energy stored in an electric field. Behavior of dielectrics in a.c. field-simple concepts, dielectric losses.
UNIT-IV
SPECIAL THEORY OF RELATIVITY: Michelson-Moreley experiment, Lorentz transformations, variation of mass with velocity, mass energy equivalence.
NUCLEAR PHYSICS: Neutron Cross-section, Nuclear fission, Moderators, Nuclear reactors, Reactor criticality, Nuclear fusion. Interaction of radiation with matter-basic concepts, radiation detectors-ionisation chamber, G.M. Counter, Scintillation and solid state detectors, cloud chamber and bubble chamber.
TEXT BOOKS:
1. Physics of the Atom - Wehr, Richards & Adair (Narosa)
2. Perspectives of Modern Physics - Arthur Beiser (TMH)
3. Modern Engineering Physics – A.S. Vasudeva (S. Chand)
REFERENCE BOOKS:
1. Electricity and Magnetism – F.W. Sears (Narosa)
2. Physics Vol-I & II – Resnick & Halliday (Wiley Eastern)
3.
A Text Book of Optics – Brij Lal & Subramanyam
Note: The Examiners will set eight questions, taking two from each unit. The students are required to attempt five questions in all selecting at least one from each unit. All questions will carry equal marks.
HUM-101-E
COMMUNICATION SKILLS IN ENGLISH
B.Tech. Semester-I
L T P Theory: 100 marks
3 1 Sessional: 50 marks
Total: 150 marks
Time: 3 Hrs.
This course is designed for the students of Engineering and Technology who need English for specific purposes in specific situations. It aims at imparting the communication skills that are needed in their academic and professional pursuits. This is achieved through an amalgamation of traditional lecture-oriented approach of teaching with the task based skill oriented methodology of learning.
Unit-I
Communicative Grammar:
Part A : Spotting the errors pertaining to nouns, pronouns, adjective and adverbs; Concord - grammatical concord, notional concord and the principle of proximity between subject and verb.
Part B : Changing the voice : from Active to Passive and Passive to Active.
Unit-II
Lexis: Idioms and phrases; Words often confused; One-Word Substitutes; Formation of words (suffixes, prefixes and derivatives);
Unit-III
Oral Communication:
Part-A: Introduction to principal components of spoken English – Transcription, Word-accent, Intonation, Weak forms in English
Part-B: Developing listening and speaking skills through various activities, such as (a) role play activities, (b) Practising short dialogues (c) Group discussion (d) Debates (e) Speeches (f) Listening to news bulletins (g) Viewing and reviewing T.V. programmes etc.
Unit-IV
Written Communication: Developing reading and writing skills through such tasks/activities as developing outlines, key expressions, situations, slogan writing and theme building exercises, dialogue writing, interpreting pictures/cartoons.
Unit-V
(For Internal Evaluation Only):
Book Review – Herein the students will be required to read and submit a review of a book (Literary or non-literary) of their own choice. This will be followed by a presentation of the same in the class
Unit-VI
Technical Writing:
(a) Business Letters, Format of Business letters and Business letter writing
(b) E-mail writing
(c) Reports, Types of Reports and Format of Formal Reports
(d) Press Report Writing
SUGGESTED READING:
1.
Language in Use (Upper intermediate Level, Adrian Doff Christopher Jones, Cambridge University Press
2.
Common Errors in English, Abul Hashem, Ramesh Publishing House, new Delhi.
3.
Objective English, Tata Mc. Graw Hill Publishing Company Ltd., New Delhi.
4.
Spoken English for India, R.K. Bansal & J.B. Harrison, Orient Longman, Delhi.
5.
The sounds of English, Veena Kumar, Makaav Educational Software, New Delhi.
6.
English Phonetics & Phonology, P. Roach, Cambridge University Press, London.
7.
English for Engineers and Technologists: A Skill Approach, Vol. 2, Orient Longman, Delhi.
8.
Business Communication, M.S. Ramesh and C.C. Pattanshetti, R.Chand and Company, Delhi
9.
Group Discussion, Sudha Publications/Ramesh Publishing House, New Delhi.
10.
English Grammar & Composition. By Rajinder Pal & Prem Lata Suri, Sultan Chand Pub. New Delhi.
SCHEME OF EXAMINATION:
All questions will be compulsory and will cover all the aspects of the syllabus except unit V. There will be sufficient internal choice.
Unit-I: 20 Marks
Questions No. 1 will require the students to carefully read the sentences given and trace the errors, if any, and then supply the correct alternatives/answers.
Unit-II: 20 Marks
Question No. 2 may have four or five parts testing knowledge of different items of vocabulary.
Unit-III: 20 Marks
Question No. 3 will have four parts of 5 marks each from part A of the unit.
Note: Speaking and listening skills of part B will primarily be tested orally through internal assessment.
Unit-IV: 20 Marks
Question No. 4 may have many parts. The questions will be framed to test students' composition skills on the elements prescribed in the unit. For example, the students may be required to develop a hypothetical situation in a dialogue form, or to develop an outline, key expression etc.
Unit-V is for internal assessment only.
Unit-VI: 20 Marks
Question No. 5 may have two parts. While the one part may require the students to frame either a press/news report for the print media or write the given business letter, or e-mail a message, the second part will have a theory question on the format of formal report and business letter.
ME-105E
ENGINEERING GRAPHICS AND DRAWING
L T P Examination : 100 marks
- 3 Sessional: 50 marks
Total: 150 marks
Time: 3 Hrs.
Unit-I
Various types of projections, First and Third angle systems of orthographic projections. Projections of points in different quadrants. Projections of straight lines – parallel to one or both reference planes, contained by one or both planes, perpendicular to one of the planes, inclined to one plane but parallel to the other plane, inclined to both the planes, true length of a line and its inclinations with reference planes, traces of a line.
Unit-II
Projections of Polyhedra Solids and solids of Revolution – in simple positions with axis perpendicular to a plane, with axis parallel to both planes, with axis parallel to one plane and inclined to the other. Development of surface of various simple solids such as cubes, cylinders, prisms, pyramids etc. orthographic views, orthographic drawings of Bolts, Nuts, Bolted joints, screw threads, screwed joints.
Note : Some simple exercise may be attempted with AUTOCAD.
Text Book
1.
Engineering Drawing Plane and Solid Geometry : N.D. Bhatt and V.M.Panchal, Forty-Fourth Edition 2002, Charotar Publishing House.
Reference Books
1.
Engineering Graphics and Drafting : P.S. Gill, Millennium Edition, S.K. Kataria and Sons.
2.
A Text Book of Engineering Drawing : S.B. Mathur, Second Revised and Enlarged Edition 2000, Vikas Publishing House.
3.
Engineering Graphics using AUTOCAD 2000 : T. Jeyapoovan, First Edition 2002, Vikas Publishing House.
CH-101E
CHEMISTRY
(COMMON FOR ALL BRANCHES)
L T P Sessional : 50 Marks
3 1 - Exam.: 100 Marks
Total: 150 Marks
Time: 3 Hrs.
Unit-1
Thermodynamics - Second law, concept of Entropy, Entropy change for an ideal gas, free energy and work functions, Free energy change, Chemical Potential, Gibb's Helmholtz equation, Clausius - Clapeyron equation, Related numerical problems with above topics. Phase-Rule - Terminology, Derivation of Gibb's Phase Rule Equation, One Component System (H2O System), Two Components systems, Eutectic system (Pb-Ag), system with congruent m.pt. (Zn-Mg), systems with incongruent m.pt. (Na-K), Applications of above Systems.
Unit-2
Water & its treatment : Part I – Sources of water, impurities in water, hardness of water and its determination, units of hardness, alkalinity of water and its determination, Related numerical problems, scale and sludge formation (composition properties and methods of prevention). Water and its treatment : Part II – Treatment of water for domestic use, coagulation, sedimentation, filtration and dis-infection, water softening, Ion-exchange process, mixed bed demineralisation, Desalination (reverse osmosis) (electrodialysis).
Unit-3
Corrosion and its prevention - Galvanic & concentration cell, Dry and wet corrosion, Electrochemical theory of corrosion, Galvanic corrosion, pitting corrosion, water-line corrosion, differential aeration corrosion, stress corrosion, factors affecting corrosion, Preventive measures (proper design, Cathodic protection, protective coatings).
Lubrication and Lubricants-Friction, mechanism of lubrication, classification and properties of lubricants, Additives for lubricants, synthetic lubricants, Greases – Preparation & properties (consistency, drop point) and uses.
Unit-4
Polymers and Polymerization-Organic polymers, polymerisation, various types of polymerisation, effect of structure on properties of polymers, preparation properties and technical applications of thermo-plastics (PVC,PVA), thermosets (PF,UF), and elastomers (SBR,GR-N), Silicones, Introduction to polymeric compsites. Analytical methods;its needs and different methodes;Spectroscopy; its defination and scope;salient features of spectrophotometer,brief introduction of titrimetric methodes,Elementry discussion on flame photometry
TEXT BOOKS:
1. Engineering Chemistry, P.C. Jain, Monica Jain (Dhanpat Rai & Co.).
2. Chemistry in Engineering & Tech., Vol.I & II, Rajaram, Kuriacose (TMH).
REFERENCE BOOKS:
1.
Instrumental methods of Chemical Analysis, MERITT & WILLARD (East-West Press).
2.
Physical Chemistry, P.W. Atkin (ELBS, Oxford Press).
3.
Physical Chemistry, W.J. Moore (Orient-Longman).
EE-101E
ELECTRICAL TECHNOLOGY
L T P Theory: 100 marks
3 2 Sessional: 50 marks
Total: 150 marks
Time: 3 Hrs.
UNIT-I
D.C. CIRCUITS: Ohm’s Law, Kirchoff’s Laws, D.C. Circuits, Nodal and Loop methods of analysis. A.C. CIRCUITS: Sinusoidal signal, instantaneous and peak values, RMS and average values, phase angle, polar & rectangular, exponential and trigonometric representations; R,L and C components, behaviors of these components in A.C. circuits. Concept of complex power, power factor.
UNIT-II
TRANSIENT RESPONSE: Transient response of RL, RC and RLC Circuits with step input. NETWORK THEOREMS: Thevenin’s theorem, Norton’s theorem, superposition theorem, maximum power transfer theorem, Star to Delta & Delta to Star transformation. SERIES AND PARALLEL A.C. CIRCUITS: Series and parallel A.C. circuits, series and parallel resonance, Q factor, cut-off frequencies and bandwidth.
UNIT-III
THREE PHASE CIRCUITS: Phase and line voltages and currents, balanced star and delta circuits, power equation, measurement of power by two wattmeter method, Importance of earthing. TRANSFORMERS: Principle, construction & working of transformer, Efficiency and regulation.
UNIT-IV
ELECTRICAL MACHINES: D.C. Machine: Principle, construction, EMF equation, Torque Equation, Types of Machine, internal & external characterstics, speed control. Induction motor: Principle, construction, EMF equation, Types of motors, slip concept, Synchronous motor: Principle, construction, Types of motors
TEXT BOOKS:
1. Basic Electrical Engg (2nd Edition) : Kothari & Nagarath, TMH
2. Electrical Technology (Vol-I) : B.L Theraja & A K Theraja, S.Chand
REFERENCE BOOKS:
1. Electrical Engineering Fundamentals : Deltoro, PHI
2. Network Analysis :Valkenburg, PHI
ENVIRONMENTAL STUDIES
(For Under-Graduate Students)
Unit 1 : The Multidisciplinary nature of environmental studies
Definition, scope and importance.
Need for public awareness.
Unit 2 : Natural Resources
Renewable and non-renewable resources :
Natural resources and associated problems.
a)
Forest resources : Use and over-exploitation, deforestation, case studies. Timber extraction, mining, dams and their effects on forests and tribal people.
b)
Water resources : Use and over-utilization of surface and ground water, floods, drought, conflicts over water, dams-benefits and problems.
c)
Mineral resources : Use and exploitation, environmental effects of extracting and mineral resources, case studies.
d)
Food resources : World food problems, changes caused by agriculture and overgrazing, effects of modern agriculture, fertilizer-pesticide problems, water logging, salinity, case studies.
e)
Energy resources : Growing energy needs, renewable and non-renewable energy sources, use of alternate energy sources. Case studies.
f)
Land resources : Land as a resource, land degradation, man induced landslides, soil erosion and desertification.
•
Role of an individual in conservation of natural resources.
•
Equitable use of resources for sustainable lifestyles.
Unit 3 : Ecosystems
•
Concept of an ecosystem.
•
Structure and function of an ecosystem.
•
Producers, consumers and decomposers.
•
Energy flow in the ecosystem.
•
Ecological succession.
•
Food chains, food webs and ecological pyramids.
•
Introduction, types, characteristic features, structure and function of the following ecosystem :
a)
Forest ecosystem
b)
Grassland ecosystem
c)
Desert ecosystem
d)
Aquatic ecosystems (ponds, streams, lakes, rivers, oceans, estuaries).
Unit : 4 Biodiversity and its conservation
•
Introduction – Definition : genetic, species and ecosystem diversity.
•
Biogeographical classification of India.
•
Value of biodiversity : consumptive use, productive use, social, ethical, aesthetic and option values.
•
Biodiversity at global, National and local levels.
•
India as a mega-diversity nation.
•
Hot-spots of biodiversity.
•
Threats to biodiversity : habitat loss, poaching of wildlife, man-wildlife conflicts.
•
Endangered and endemic species of India.
•
Conservation of biodiversity : in-situ and ex-situ conservation of biodiversity.
Unit 5 : Environmental Pollution
Definition
•
Causes, effects and control measures of :
a)
Air pollution
b)
Water pollution
c)
Soil pollution
d)
Marine pollution
e)
Noise pollution
f)
Thermal pollution
g)
Nuclear hazards
•
Solid waste Management : Causes, effects and control measures of urban and industrial wastes.
•
Role of an individual in prevention of pollution.
•
Pollution case studies.
•
Disaster management : floods, earthquake, cyclone and landslides.
Unit 6 : Social Issues and the Environment
•
From Unsustainable to Sustainable development
•
Urban problems related to energy
•
Water conservation, rain water harvesting, watershed management
•
Resettlement and rehabilitation of people; its problems and concerns. Case studies.
•
Environmental ethics : Issues and possible solutions.
•
Climate change, global warming, acid rain, ozone layer depletion, nuclear accidents and holocaust. Case studies.
•
Wasteland reclamation.
•
Consumerism and waste products.
•
Environment Protection Act.
•
Air (Prevention and Control of Pollution) Act.
•
Water (Prevention and Control of Pollution) Act
•
Wildlife Protection Act
•
Forest Conservation Act
•
Issues involved in enforcement of environmental legislation
•
Public awareness.
Unit 7 : Human Population and the Environment
•
Population growth, variation among nations
•
Population explosion – Family Welfare Programme
•
Environment and human health.
•
Human Rights.
•
Value Education.
•
HIV/AIDS
•
Women and Child Welfare.
•
Role of Information Technology in Environment and human health.
•
Case Studies.
Unit 8 : Field Work
•
Visit to a local area to document environmental assets-river / forest / grassland / hill / mountain.
•
Visit to a local polluted site – Urban / Rural / Industrial / Agricultural.
•
Study of common plants, insects, birds.
•
Study of simple ecosystems – pond, river, hill slopes, etc.
Examination Pattern : The question paper should carry 100 marks
The structure of the question paper being.
PART – A : Short Answer Pattern 25 Marks
PART – B : Essay type with inbuilt choice 50 Marks
PART – C : Field Work 25 Marks
INSTRUCTIONS FOR THE EXAMINERS
Part – A Question 1 is compulsory and will contain ten short-answer type question of 2.5 marks each covering the entire syllabus.
Part – B Eight essay type questions (with inbuilt choice) will be set from the entire syllabus and the candidates will be required to answer, any four of them. Each essay type question will be of the 12½ marks.
The examination will be conducted by the college concerned at its own level earlier than the annual examination and each student will be required to score minimum of 35% marks each in theory and Practical. The marks obtained in this qualifying paper will not be included in determining the percentage of marks obtained for the award of degree. However, these will be shown in the detailed marks certificate of the student.
 SERVICE IS PRODUCED BY UNIQUE GROUP.www.uniqueinstitutes.org ,for fun www.flowerrose81.blogspot.com, FOR FREE ADVERTISEMENT www.pathakadvertisement.blogspot.com

»»  read more

Read more...

SYLLABUS OF KUK CIVIL ENGG BTECH

INTRODUCTION TO BIOTECHNOLOGY
(BT-101 E)
L T P/D Theory: 100 marks
3 1 Sessional : 50 marks
Total: 150 marks
Time: 3 Hrs.
UNIT - I
Introduction to life: Characteristics of living organisms. Hierarchy of organisation and factors responsible for regulating different levels of organisations. Structure of Prokaryotic and Kukaryotic cell. Basic concept of State and Homeostasis.
Introduction to Biomolecules: Definition, general classification and important functions of carbohydrates, lipids, proteins, nucleic acids and vitamins.
Enzymes as biocatalysts: General characteristics, nomenclature and classification of Enzymes. Effect of temperature, pH, enzyme and substrate concentrations on the activity of enzymes. Elementary concept of cofactors and coenzymes.
UNIT - II
Biodiversity :
(i) Plant System : Basic concepts of plant growth, nutrition, photosynthesis and nitrogen fixation. Types of Growth regulators and their physiological effects.
(ii)
Animal System : Elementary Study of Digestive, Respiratory, Circulatory, Excretory systems and their functions.
(iii)
Microbial System : History of Microbiology, types of microbes and properties. Economic importance and control of microbes.
UNIT - III
Evolution: Theories of evolution. Mendel’s laws of inheritance. Variation and speciation.
Genetic: Cell division – Mitosis and Meiosis. Evidence of nucleic acids as a genetic material. Central Dogma.
Genetic Engineering : Elementary knowledge of Recombinant DNA Technology, Bio-informatics and Genomics.
UNIT – IV
Introduction to Biotechnology : Definition, scope and achievements. Tools used in biotechnology.
Applications of Biotechnology in Agriculture, Medicine and Environment – an elementary knowledge.
Prospects and public perception of Biotechnology.
Text/ Reference Books:
1.
Cell Biology and Genetics. 9th edition. Starr, C. and Taggard; R. (2001) Thomson Learning USA.
2.
Life Science of Biology 6th edition Purves W.K.; Sadava, D.; Orians, G.H. and Heller, H.C. (2001). W.H. Freeman & company, USA.
3.
Basic Biotechnology. Ratledge, C. and Kristiansen, B. (2001) Cambridge University Press.
4.
Basic Biotechnology. Ignacimuthu, S.J. (2002) Tata McGraw-Hill Pub., New Delhi
5.
Genes VII Lewis Benjamin (2002). Oxford Univ. Press Oxford.
6.
Biotechnology 3rd Edition. Smith, J.E. (2003) Cambridge University Press.
ME-101E
ELEMENTS OF MECHANICAL ENGINEERING
L T P Theory: 75 marks
3 1 Sessional: 25 marks
Total: 100 marks
Time: 3 Hrs.
Unit-I
Properties of Steam & Boilers: Formation of steam at constant pressure, Thermodynamics properties of steam, Condition of steam, Steam tables, Measurement of dryness fraction by throttling calorimeter, Classification of boilers, Comparison of water and fire tube boilers mounting and accessories with their functions, Constructional and operational details of Cochran and Babcock and Wilcox boilers, Problems.
Steam Turbines and Condensers: Classification of turbines, Working principle of impulse and reaction turbine, Compounding of impulse turbine, Comparison of impulse and reaction turbines, Types of condensers, Cooling ponds and cooling towers, Condenser and vacuum efficiencies.
Unit-II
I.C. Engines and Gas Turbines: Introduction, Classification, Constructional details and working of two-stroke and four-stroke diesel and petrol engines, Otto, Diesel and Dual cycles, Working principle of gas turbine, Constant pressure gas turbine cycle.
Water Turbines, Pumps and Hydraulic Devices: Introduction, Classification, Construction details and working of Pelton, Francis and Kaplan turbines, Specific speed and selection of turbines, Classification of water pumps and their working, Hydraulic jack and lift.
Unit-III
Simple Lifting Machines: Definition of machine, Velocity ratio, Mechanical advantage, Efficiency, Laws of machines, Reversibility of machine, Wheel and axle, Differential pulley block, Single, double and triple start worm and worm wheel, Single and double purchase winch crabs, Simple and compound screw jacks. Problems.
Power Transmission Methods and Devices: Introduction to Power transmission, Belt drive, Rope drive, Chain drive, Pulley, Gear drive, Types of gears, Gear train, Clutches, Types and function of clutches, Types and function of brakes, Power measurement by dynamometer, Types of dynamometers.
Unit-IV
Stresses and Strains: Introduction, Concept & types of Stresses and strains, Poison’s ratio, stresses and strains in simple and compound bars under axial loading, Stress-strain diagrams, Hooks law, Elastic constants & their relationships, Principle stresses & strains and principal- planes, Mohr’s circle of stresses. Numerical problems.
Bending Moment & Shear Force: Definitions, SF and BM diagrams for cantilever and simply supported beam. Calculation of maximum SF, BM and point of contra-flexure under the loads of (i) concentrated load (ii) uniformly distributed load (iii) combination of concentrated and uniformly distributed loads. Problems.
Text Books:
1. Strength of Materials - G.H. Ryder, Pub.- ELBS.
2. Hydraulic and Fluid Mechanics – Modi and Seth, Pub. – Standard Book House, New Delhi
3. Engineering Thermodynamics – C.P. Arora, Pub. - TMH, New Delhi
4. Thermal Engineering – A.S. Sarad, Pub. - Satya Prakashan, New Delhi.
5. Engineering Mechanics – K.L. Kumar, Pub. - TMH, New Delhi.
6. Theory of Machines – S.S. Rattan, Pub. – TMH, New Delhi.
Reference Books:
1.Strength of Materials – Popov, Pub. - PHI, New Delhi.
2. Hydraulic Machines – Jagdish Lal, Pub.- Metropolitan, Allahbad.
3. Thermal Science and Engineering – D.S. Kumar, Pub. – Kateria & Sons, New Delhi.
ME- 103E
MANUFACTURING PROCESSES
L T P Theory : 100 marks
4 Sessional : 50 marks
Total: 150 marks
Time: 3 Hrs.
Unit-I
Introduction: Introduction to Manufacturing Processes and their Classification. Industrial Safety; Introduction, Types of Accidents, Causes and Common Sources of Accidents, Methods of Safety, First Aid.
Engineering Materials: General Properties and Applications of Engineering Materials, Mild Steel, Medium Carbon Steel, High Carbon Steel, High Speed Steel and Cast Iron.
Unit-II
Foundry: Introduction to Casting Processes, Basic Steps in Casting Process, Pattern, Types of Patterns, Pattern Allowances, Risers, Runners, Gates, Moulding Sand and its composition, Sand Preparation, Molding Methods, Core Sands and Core Making, Core Assembly, Mold Assembly, Melting ( Cupola) and Pouring, Fettling, Casting Defects and Remedies.
Unit-III
Cold Working ( Sheet Metal Work ): Sheet Metal Operations, Measuring, Layout Marking, Shearing, Punching, Blanking, Piercing, Forming, Bending and Joining Advantages and Limitations.
Hot Working Processes: Introduction to Hot Working, Principles of Hot Working Processes, Forging, Rolling, Extrusion, Wire Drawing. Plant Layout, Objectives of Layout, Types of Plant Layout and their Advantages.
Unit-IV
Introduction to Machine Tools: Specifications and Uses of commonly used Machine Tools in a Workshop such as Lathe, Shaper, Planer, Milling, Drilling, Slotter, Introduction to Metal Cutting. Nomenclature of a Single Points Cutting Tool and Tool Wear. Mechanics of Chips Formations, Type of Chips , Use of Coolants in machining.
Welding: Introduction to Welding, Classification of Welding Processes, Gas Welding: Oxy-Acetylene Welding, Resistance Welding; Spot and Seam Welding, Arc Welding: Metal Arc, TIG & MIG Welding, Welding Defects and Remedies, Soldering & Brazing.
Text Books :
1.
Workshop Technology Vol. I &II - Hazra & Chaudhary, Asian Book Comp., New Delhi.
2.
Process and Materials of Manufacture-Lindberg, R.A. Prentice Hall of India, New Delhi.
3.
Principles of Manufacturing Materials and Processes- Campbell, J.S.- McGraw- Hill.
Reference Books:
1.
Manufacturing Science-Amitabha Ghosh & Ashok Kumar Malik, - East-West Press.
2.
Manufacturing Process and Systems - Ostwald, Munoz , John Wiley.
3.
Workshop Technology, Vol. 1, 2 & 3 – Chapman, WAJ, Edward Arnold.
.
CSE -101E
FUNDAMENTALS OF COMPUTERS & PROGRAMMING IN C
L T P Theory: 100 marks
3 2 Sessional: 50 marks
Total: 150 marks
Time: 3 Hrs.
Unit-1
An Overview of Computer System: Anatomy of a digital Computer, Memory Units, Main and Auxiliary Storage Devices, Input Devices, Output Devices, Classification of Computers. Radix number system: Decimal, Binary, Octal, Hexadecimal numbers and their inter-conversions; Representation of information inside the computers. Operating System Basics: Introduction to PC operating Systems: DOS, Unix/Linux, Windows 2000.
Unit-2
Programming Languages: Machine-, Assembly-, High Level- Language, introduction to Assembler, Compiler, Interpreter, Debuggers, Linker and Loader. Programming fundamentals: problem definition, algorithms, flow charts and their symbols.
Internet basics: How Internet works, Major features of internet, Emails, FTP, Using the internet.
Unit-3
C Programming language: C fundamentals, formatted input/ output, expressions, selection statements, loops and their applications; Basic types, arrays, functions, including recursive functions, program organization: local and external variables and scope & arrays.
Unit-4
Strings: strings literals, string variables, I/O of strings, arrays of strings; applications. Structures, Unions and Enumerations: Structure variables and operations on structures; Structured types, nested array structures; unions; enumeration as integers, tags and types. Standard library: Input / output; streams, file operations, formatted I/O, character I/O, line I/O, block, string I/O, Library support for numbers and character data, error handling:
Text Books:
1.
Using Information Technology, 5th Edi, Brian K Williams & Stacey C. Sawyer, 2003, TMH
2.
The C Programming Language by Dennis M Ritchie, Brian W. Kernigham, 1988, PHI.
3.
C Programming – A modern approach by K.N. King, 1996, WW Norton & Co.
Reference Books:
1.
Information technology, Dennis P. Curtin, Kim Foley, Kunal Sen, Cathleen Morin, 1998, TMH
2.
Theory and problem of programming with C, Byron C Gottfried, TMH
3.
Teach yourself all about computers by Barry Press and Marcia Press, 2000, IDG Books India.
4.
Using Computers and Information by Jack B. Rochester, 1996, Que Education & Training.
.



THIS SERVICE IS PRODUCED BY UNIQUE GROUP.www.uniqueinstitutes.org ,for fun www.flowerrose81.blogspot.com, FOR FREE ADVERTISEMENT www.pathakadvertisement.blogspot.com

»»  read more

Read more...

SYLLABUS OF KUK CIVIL ENGG BTECH

B. Tech. III Semester (Civil)
CE-201E STRUCTURAL ANALYSIS-I
L T P/D Total Max. Marks: 150
3 2 - 5 Theory: 100
Sessional: 50
Duration: 3 hrs.
UNIT-I
Analysis of stresses and strains:
Analysis of simple states of stresses and strains, elastic constraints, bending stresses, theory of simple bending, flexure formula, combined stresses in beams, shear stresses, Mohr's circle, Principle stresses and strains, torsion in shafts and closed thin walled sections, stresses and strains in cylindrical shells and spheres under internal pressure.
Theory of Columns:
Slenderness ratio, end connections, short columns, Euler's critical buckling loads, eccentrically loaded short columns, cylinder columns subjected to axial and eccentric loading.
UNIT-II
Bending moment and shear force in determinate beams and frames:
Definitions and sign conventions, axial force, shear force and bending moment diagrams.
Three hinged arches:
horizontal thrust, shear force and bending moment diagrams.
UNIT-III
Deflections in beams:
Introduction, slope and deflections in beams by differential equations, moment area method and conjugate beam method, unit load method, principle of virtual work, Maxwell's Law of Reciprocal Deflections, Williot’s Mohr diagram
UNIT-IV
Analysis of statically determinate trusses:
Introduction, various types, stability, analysis of plane trusses by method of joints and method of sections, analysis of space trusses using tension coefficient method.
Note for Paper-setter: EIGHT questions are to set selecting at least TWO questions from each unit, covering entire syllabus. Students will be required to attempt FIVE questions selecting at least ONE question from each unit.
Books:
1
Strength of Materials Part-I, S.Timoshenko, Affiliated East-West Press, New . Delhi
2
Mechanics of Solids, Prasad, V. S. Gakgotia Pub., New Delhi.
3
Elementary Structural Analysis, Jain, A. K., Nem Chand & Bros, Roorkee.
4
Elementary Structural Analysis, Wibur & Nooris, McGraw Hill Book Co., Newyork.
5
Structural Analysis, Bhavikatti S.S.,Vikas Pub.House, N.Delhi.
B. Tech. III Semester (Civil)
CE-203E BUILDING CONSTRUCTION, MATERIALS & DRAWING
L T P/D Total Max. Marks: 150
4 - 2 6 Theory: 100 marks
Sessional: 50 marks
Duration: 3 hrs.
A. CONSTRUCTION
UNIT-I
Masonry Construction:
Introduction, various terms used, stone masonry-Dressing of stones, Classifications of stone masonry, safe permissible loads, Brick masonry-bonds in brick work, laying brick work, structural brick work-cavity and hollow walls, reinforced brick work, Defects in brick masonry, composite stone and brick masonry, glass block masonry.
Cavity and Partition Walls:
Advantages, position of cavity, types of non-bearing partitions, constructional details and precautions, construction of masonry cavity wall.
Foundation:
Functions, types of shallow foundations, sub-surface investigations, geophysical methods, general feature of shallow foundation, foundations in water logged areas, design of masonry wall foundation, introduction to deep foundations i.e. pile and pier foundations.
UNIT-II
Damp-Proofing and Water-Proofing:
Defects and causes of dampness, prevention of dampness, materials used, damp-proofing treatment in buildings, water proofing treatment of roofs including pitched roofs.
Roofs and Floors:
Types of roofs, various terms used, roof trusses-king post truss, queen post truss etc.
Floor structures, ground, basement and upper floors, various types of floorings.
Doors and Windows:
Locations, sizes, types of doors and windows, fixures and fastners for doors and windows.
Acoustics, Sound Insulation and Fire Protection:
Classification, measurement and transmission of sound, sound absorber, classification of absorbers, sound insulation of buildings, wall construction and accoustical design of auditorium, fire-resisting properties of materials, fire resistant construction and fire protection requirements for buildings.
B.
MATERIALS
UNIT-III
Stones:
Classification, requirements of good structural stone, quarrying, blasting and sorting out of stones, dressing, sawing and polishing, prevention and seasoning of stone.
Brick and Tiles:
Classification of bricks, constituents of good brick earth, harmful ingredients, manufacturing of bricks, testing of bricks.
Tiles: Terra-cotta, manufacturing of tiles and terra-cotta, types of terra-cotta, uses of terra-cotta.
Limes, Cement and Mortars:
Classification of lime, manufacturing, artificial hydraulic lime, pozzolona, testing of lime, storage of lime, cements composition, types of cement, manufacturing of ordinary Portland cement, testing of cement, special types of cement, storage of cement.
Mortars: Definition, proportions of lime and cement mortars, mortars for masonry and plastering.
UNIT-IV
Timber:
Classification of timber, structure of timber, seasoning of timber, defects in timber, fire proofing of timber, plywood, fiberboard, masonite and its manufacturing, important Indian timbers.
Ferrous and Non-Ferrous Metals:
Definitions, manufacturing of cast iron, manufacturing of steel from pig iron, types of steel, marketable form of steel, manufacturing of aluminium and zinc.
Paints and Varnishes:
Basic constituents of paints, types of paints, painting of wood, constituents of varnishes, characteristics and types of varnishes.
Plastic:
Definition, classification of plastics, composition and raw materials, manufacturing, characteristics and uses, polymerization, classification, special varieties.
C. DRAWINGS
1.
Typical drawings of:
a)
Cavity Wall
b)
Bonds in brick work
c)
Grillage foundation
2.
Preparation of building drawing mentioning its salient features including the following details:
a)
Ground floor plan
b)
Two Sectional Elevations
c)
Front and Side Elevations
d)
Plan and Sectional Elevation of stair case, doors/ windows/ ventilators, floor and roof.
Note for Paper-setter: EIGHT questions are to set selecting at least TWO questions from each unit, covering entire syllabus. Students will be required to attempt FIVE questions selecting at least ONE question from each unit.
Books:
1
Building Construction, Sushil Kumar, Standard Pub., N. Delhi
2
Building Material, Rangawala
3
Construction Engineering, Y.S. Sane
4
Building Construction, Gurcharan Singh, Standard Pub., N. Delhi.
B. Tech. III Semester (Civil)
CE-205E FLUID MECHANICS-I
L T P/D Total Max. Marks: 150
3 2 - 5 Theory: 100 marks
Sessional: 50 marks
Duration: 3 hrs.
UNIT-I
Introduction:
Fluid properties, mass density, specific weight, specific volume and specific volume and specific gravity, surface tension, capillarity, pressure inside a droplet and bubble due to surface tension, compressibility viscosity, Newtonian and Non-newtonian fluids, real and ideal fluids.
Kinematics of Fluid Flow:
Stready & unsteady, uniform and non-uniform, laminar & turbulent flows, one, two & three dimensional. flows, stream lines, streak lines and path lines, continuity equation in differential form, rotation and circulation, elementary explanation of stream function and velocity potential, rotational and irrotational flows, graphical and experimental methods of drawing flownets.
UNIT-II
Fluid Statics:
Pressure-density-height relationship, gauge and absolute pressure, simple differential and sensitive manometers, two liquid manometers, pressure on plane and curved surfaces, center of pressure, Buoyancy, stability of immersed and floating bodies, determination of metacentric height, fluid masses subjected to uniform acceleration, free and forced vortex.
UNIT-III
Dynamic of Fluid Flow:
Euler's equation of motion along a streamline and its integration, limitation of Bernouli's equation, Pitot tubes, venturimeter, Orficemeter, flow through orifices & mouth pieces, sharp crested weirs and notches, aeration of nappe.
UNIT-IV
Boundary layer analysis:
Boundary layer thickness, boundary layer over a flat plate, laminar boundary layer, turbulent boundary layer, laminar sub-layer, smooth and rough boundaries, local and average friction coefficient, separation and its control.
Dimensional Analysis and Hydraulic Similude:
Dimensional analysis, Buckinghum theorem, important dimensionless numbers and their significance, geometric, kinematic and dynamic similarity, model studies, physical modeling, similar and distorted models.
Note for Paper-setter: EIGHT questions are to set selecting at least TWO questions from each unit, covering entire syllabus. Students will be required to attempt FIVE questions selecting at least ONE question from each unit.
Books:
1
Hydraulic and Fluid Mechanic by P.N.Modi & S.M.Seth
2
Introduction to Fluid Mechanics by Robert W.Fox & Alan T.McDonald
3
Fluid Mechanics Through Problems by R.J.Garde
4
Engineering Fluid Mechanics by R.J.Garde & A.G.Mirajgaoker
B. Tech. III Semester (Civil)
CE-207E SURVEYING-I
L T P/D Total Max. Marks: 150
3 1 - 4 Theory: 100 marks Sessional: 50 marks
Duration: 3 hrs.
UNIT-I
Fundamental Principles of Surveying:
Definition, objects, classification, fundamental principles, methods of fixing stations.
Measurement of distances:
Direct measurement, instruments for measuring distance, instruments for making stations, chaining of line, errors in chaining, tape corrections examples.
Compass and Chain Traversing:
Methods of traversing, instruments for measurement of angles-prismatic and surveyor's compass, bearing of lines, local attraction, examples.
UNIT-II
Leveling:
Definition of terms used in leveling, types of levels and staff, temporary adjustment of levels, principles of leveling, reduction of levels, booking of staff readings, examples, contouring, characteristics of contours lines, locating contours, interpolation of contours.
Plane Table Surveying:
Plane table, methods of plane table surveying, radiation, intersection, traversing and resection, two point and three point problems.
UNIT-III
Theodolite and Theodolite Traversing:
Theodolites, temporary adjustment of theodolite, measurement of angles, repetition and reiteration method, traverse surveying with theodolite, checks in traversing, adjustment of closed traverse, examples.
Tacheometry:
Uses of tacheometry, principle of tacheometric surveying, instruments used in tacheometry, systems of tacheometric surveying-stadia system fixed hair method, determination of tacheometric constants, tangential systems, examples.
UNIT-IV
Curves:
Classification of curves, elements of simple circular curve, location of tangent points-chain and tape methods, instrumental methods, examples of simple curves. Transition Curves-Length and types of transition curves, length of combined curve, examples.
Vertical Curves: Necessity and types of vertical curves.
Note for Paper-setter: EIGHT questions are to set selecting at least TWO questions from each unit, covering entire syllabus. Students will be required to attempt FIVE questions selecting at least ONE question from each unit.
Books:
1.
Surveying Vol.I & II by B.C.Punmia
2.
Surveying Vol.I by T.P.Kanitkar
B. Tech. III Semester (Civil)

CE-209E ENGINEERING GEOLOGY
L T P/D Total Max. Marks: 150
3 1 - 4 Theory: 100 marks
Sessional: 50 marks
Duration.: 3 hrs.
UNIT-I
Introduction:
Definition, object, scope and sub division of geology, geology around us. The interior of the earth. Importance of geology in Civil Engineering projects.
Physical Geology:
The external and internal geological forces causing changes, weathering and erosion of the surface of the earth. Geological work of ice, water and winds. Soil profile and its importance. Earthquakes and volcanoes.
UNIT-II
Mineralogy and Petrology:
Definition and mineral and rocks. Classification of important rock forming minerals, simple description based on physical properties of minerals. Rocks of earth surface, classification of rocks. Mineral composition, Textures, structure and origin of Igneous, Sedimentary and Metamorphic rocks. Aims and principles of stratigraphy. Standard geological/stratigraphical time scale with its sub division and a short description based on engineering uses of formation of India.
Structural Geology:
Forms and structures of rocks. Bedding plane and outcrops Dip and Strike. Elementary ideas about fold, fault, joint and unconformity and recognition on outcrops. Importance of geological structures in Civil Engineering projects.
UNIT-III
Applied Geology:
Hydrogeology, water table, springs and Artesian well, aquifers, ground water in engineering projects. Artificial recharge of ground water, Elementary ideas of geological investigations. Remote sensing techniques for geological and hydrological survey and investigation. Uses of geological maps and interpretation of data, geological reports.
Suitability and stability of foundation sites and abutments:
Geological condition and their influence on the selection, location, type and design of dams, reservoirs, tunnels, highways, bridges etc. Landslides and Hill-slope stability.
UNIT-IV
Improvement of foundation rocks:
Precaution and treatment against faults, joints and ground water, retaining walls and other precautions.
Geology and environment of earth.
Note: The physical study of rock samples and minerals may be performed in the tutorials.
Note for Paper-setter: EIGHT questions are to set selecting at least TWO questions from each unit, covering entire syllabus. Students will be required to attempt FIVE questions selecting at least ONE question from each unit.
Books:
1
A Text Book of Geology by P.K. Mukherjee
2
Physical and General Geology by S.K.Garg
3
Engineering and General Geology by Prabin Singh
4
Introduction of Physical Geology by A.Holmes.
MATHEMATICS – III MATH-201 E
L T P Theory : 100
3 1 - Sessional : 50
Total : 150
Duration of Exam : 3 Hrs.
UNIT – I
Fourier Series : Euler’s Formulae, Conditions for Fourier expansions, Fourier expansion of functions having points of discontinuity, change of interval, Odd & even functions, Half-range series.
Fourier Transforms : Fourier integrals, Fourier transforms, Fourier cosine and sine transforms. Properties of Fourier transforms, Convolution theorem, Perseval’s identity, Relation between Fourier and Laplace transforms, Fourier transforms of the derivatives of a function, Application to boundary value problems.
UNIT-II
Functions of a Complex Variables : Functions of a complex variable, Exponential function, Trigonometric, Hyperbolic and Logarithmic functions, limit and continuity of a function, Differentiability and analyticity.
Cauchy-Riemann equations, Necessary and sufficient conditions for a function to be analytic, Polar form of the Cauchy-Riemann equations, Harmonic functions, Application to flow problems, Conformal transformation, Standard transformations (Translation, Magnification & rotation, inversion & reflection, Bilinear).
UNIT-III
Probability Distributions : Probability, Baye’s theorem, Discrete & Continuous probability distributions, Moment generating function, Probability generating function, Properties and applications of Binomial, Poisson and normal distributions.
UNIT-IV
Linear Programming : Linear programming problems formulation, Solution of Linear Programming Problem using Graphical method, Simplex Method, Dual-Simplex Method.
Text Book
1.
Higher Engg. Mathematics : B.S. Grewal
2.
Advanced Engg. Mathematics : E. Kreyzig
Reference Book
1.
Complex variables and Applications : R.V. Churchil; Mc. Graw Hill
2.
Engg. Mathematics Vol. II: S.S. Sastry; Prentice Hall of India.
3.
Operation Research : H.A. Taha
4.
Probability and statistics for Engineer : Johnson. PHI.
Note : Examiner will set eight question, taking two from each unit. Students will be required to attempt five questions taking at least one from each unit.
B. Tech III Semester (Civil)
CE-211E STRUCTURAL MECHANICS-I (P)
L T P/D Total Max. Marks - 75
- - 2 2 Viva-Voce - 25 marks
Sessional - 50 marks
Duration – 3 Hours
1.
Verification of reciprocal theorem of deflection using a simply supported beam.
2.
Verification of moment area theorem for slopes and deflections of the beam.
3.
Deflections of a truss- horizontal deflection & vertical deflection of various joints of a pin- jointed truss.
4.
Elastic displacements (vertical & horizontal) of curved members.
5.
Experimental and analytical study of 3 hinged arch and influence line for horizontal thrust.
6.
Experimental and analytical study of behaviour of struts with various end conditions.
7.
To determine elastic properties of a beam.
8.
Uniaxial tension test for steel (plain & deformed bars)
9.
Uniaxial compression test on concrete & bricks specimens.
B. Tech. III Semester (Civil)
CE-213E FLUID MECHANICS-I(P)
L T P/D Total Max.Marks:75
- - 2 2 Viva-voce:25 marks
Sessionals: 50 marks
Duration: 3 hours
1
To determine metacentric height of the ship model.
2
To verify the Bernoulli's theorem.
3
To determine coefficient of discharge for an Orificemeter.
4
To determine coefficient of discharge of a venturimeter.
5
To determine the various hydraulic coefficients of an Orifice (Cd, Cc, Cv).
6
To determine coefficient of discharge for an Orifice under variable head.
7
To calibrate a given notch.
8
To determine coefficient of discharge for a mouth piece.
9
Drawing of a flownet by Viscous Analogy Model and Sand Box Model.
10
To study development of boundary layer over a flat plate.
11
To study velocity distribution in a rectangular open channel.
12
Velocity measurements by current meter, float, double float (demonstration
only).
13
Experiment on Vortex formation (demonstration only).
B.Tech.III Semester(Civil)
CE-215E SURVEYING-I(P)
L T P/D Total Max.Marks:100
- - 3 3 Sessionals:50 marks
Viva-voce: 50 marks
Duration:3 hours
1
Chain surveying: Chaining and chain traversing.
2
Compass traversing.
3
Plane tabling: methods of plane table surveying, two point & three point problems.
4
Leveling: Profile leveling and plotting of longitudinal section and cross
sections. y leveling. Permanent adjustment of level.
Reciprocal leveling.
Contouring and preparation contour map.
5
Use of tangent clinometer.

THIS SERVICE IS PRODUCED BY UNIQUE GROUP.www.uniqueinstitutes.org ,for fun www.flowerrose81.blogspot.com, FOR FREE ADVERTISEMENT www.pathakadvertisement.blogspot.com

»»  read more

Read more...